Maintenance and User Guide
We are confident that you chose Sixinch Adria furniture and freeform objects produced using our FoamCoating technology for their unique and reliable qualities and characteristics. To ensure the long-lasting performance and functionality of our products, we've prepared these simple usage guidelines for you
Sixinch Adria furniture and freeform objects are suitable for both indoor and outdoor use. They can be stored and operated at temperatures ranging from -40 °C to +85 °C. Failure to comply with these temperature limits may result in loss of the furniture’s properties and quality.
The maximum load per seating place is 120 kg.
Temporary crease lines may appear when the product is subjected to heavy use in public spaces or under pressure. These lines will disappear over time thanks to the continuous air circulation within the product.
The maximum load per seating place is 120 kg.
Temporary crease lines may appear when the product is subjected to heavy use in public spaces or under pressure. These lines will disappear over time thanks to the continuous air circulation within the product.
Installation and dismantling must be carried out by qualified specialists, following the manufacturer’s instructions and recommendations.
Furniture must be placed on level surfaces. Seating and reclining furniture must stand on all legs and rest on flat, solid, and uniform surfaces to ensure proper air circulation¹. Do not place them in water, soil, sand, or similar surfaces.
When moving furniture, hold it only by the lower part and avoid dragging it across the floor.
If the furniture has built-in power elements, disconnect all cables before moving it. Avoid direct exposure to water on furniture surfaces, especially in areas with built-in equipment.
When using products as floor coverings, remove shoes or wear footwear with flat, soft soles.
During construction work, either remove the furniture from the room or ensure its protection.
Avoid contact of sharp, pointed, or cutting objects with FlexPlus-coated surfaces.
Do not exceed the permissible load and do not use the products for purposes other than intended.
¹ Technical bottom
Each FlexPlus product has an air-circulation valve. This valve allows the product to maintain its shape and original appearance for a longer period of use. It must remain open and unobstructed so that air can flow into the product without interference. Such products must not be placed in soil, water, earth, sand, etc.
For outdoor use and for rooms with high humidity (in particular, near swimming pools in fitness clubs, in saunas, etc.), a reinforced bottom with legs is required. A reinforced bottom is also mandatory for all products with integrated sockets and other electronic devices.
Furniture must be placed on level surfaces. Seating and reclining furniture must stand on all legs and rest on flat, solid, and uniform surfaces to ensure proper air circulation¹. Do not place them in water, soil, sand, or similar surfaces.
When moving furniture, hold it only by the lower part and avoid dragging it across the floor.
If the furniture has built-in power elements, disconnect all cables before moving it. Avoid direct exposure to water on furniture surfaces, especially in areas with built-in equipment.
When using products as floor coverings, remove shoes or wear footwear with flat, soft soles.
During construction work, either remove the furniture from the room or ensure its protection.
Avoid contact of sharp, pointed, or cutting objects with FlexPlus-coated surfaces.
Do not exceed the permissible load and do not use the products for purposes other than intended.
¹ Technical bottom
Each FlexPlus product has an air-circulation valve. This valve allows the product to maintain its shape and original appearance for a longer period of use. It must remain open and unobstructed so that air can flow into the product without interference. Such products must not be placed in soil, water, earth, sand, etc.
For outdoor use and for rooms with high humidity (in particular, near swimming pools in fitness clubs, in saunas, etc.), a reinforced bottom with legs is required. A reinforced bottom is also mandatory for all products with integrated sockets and other electronic devices.
To clean the furniture, use a soft microfibre cloth, suede, or a sponge moistened with water.
Use professional cleaning agents specifically designed for glass, mirrors, floors, and furniture, which are effective at removing various types of dirt. Always follow the instructions on the packaging when using these products.
Basic maintenance is recommended at least once a week.
In case of heavy contamination, the surface should be cleaned within the first 6 hours. If the contamination remains on the surface for a longer period, the risk of streaks, stains, and damage to the furniture, freeform objects products and their components increases.
It is also not recommended to leave colouring liquids (tea, coffee, energy drinks, red wine, medications, skincare and haircare products, vegetable and fruit juices, etc.) on the furniture surface for an extended period. These may cause difficult-to-remove stains.
When cleaning surfaces, the use of hard tools (stiff brushes, scrapers, sponges with plastic or metal abrasive layers), as well as abrasive powders and aggressive liquids (acids, alkalis, solvents, oils), is strictly prohibited.
Use professional cleaning agents specifically designed for glass, mirrors, floors, and furniture, which are effective at removing various types of dirt. Always follow the instructions on the packaging when using these products.
Basic maintenance is recommended at least once a week.
In case of heavy contamination, the surface should be cleaned within the first 6 hours. If the contamination remains on the surface for a longer period, the risk of streaks, stains, and damage to the furniture, freeform objects products and their components increases.
It is also not recommended to leave colouring liquids (tea, coffee, energy drinks, red wine, medications, skincare and haircare products, vegetable and fruit juices, etc.) on the furniture surface for an extended period. These may cause difficult-to-remove stains.
When cleaning surfaces, the use of hard tools (stiff brushes, scrapers, sponges with plastic or metal abrasive layers), as well as abrasive powders and aggressive liquids (acids, alkalis, solvents, oils), is strictly prohibited.
Warranty is 24 months from the date of delivery.
The warranty covers manufacturing defects: coating damage, creases, delamination, fading, and other deformation of the furniture and objects that occurred before the products were handed over to the customer or during operation when used in compliance with the rules.
Warranty termination:
The warranty covers manufacturing defects: coating damage, creases, delamination, fading, and other deformation of the furniture and objects that occurred before the products were handed over to the customer or during operation when used in compliance with the rules.
Warranty termination:
- Expiration of the warranty period;
- Failure to comply with operating conditions;
- Presence of mechanical damage and defects, signs of unauthorised interference with the product resulting from improper use, unqualified assembly, repair, or transportation;
- Exceeding the permissible load on the product;
- Damage to the product caused by intentional or accidental actions of the consumer;
- Damage caused by pets;
- Damage resulting from foreign objects, liquids, animals, insects, etc. getting inside the product;
- Damage resulting from modifications to the product’s design;
- Improper use or use outside the product’s intended purpose.
If a product becomes deformed, in some cases it can be repaired.
Each case is reviewed individually.
To submit a repair request, please send an email to info@sixinch.si with a description of the issue and photos of the product. We will review the possible causes within 5 business days. If the photos are insufficient, the product may need to be delivered to us for a full inspection.
If the issue is confirmed as a warranty case, we will repair or replace the product free of charge. If it is not covered under warranty, we will offer available solutions, including re-coating services.
Each case is reviewed individually.
To submit a repair request, please send an email to info@sixinch.si with a description of the issue and photos of the product. We will review the possible causes within 5 business days. If the photos are insufficient, the product may need to be delivered to us for a full inspection.
If the issue is confirmed as a warranty case, we will repair or replace the product free of charge. If it is not covered under warranty, we will offer available solutions, including re-coating services.
When these operating rules are followed, the expected service life of the products is at least 10 years. Excessive or improper loads, as well as insufficient maintenance, can reduce their service life.
Remember: following the storage and usage rules helps extend the life of the product.
For Sixinch Adria furniture, adhering to these rules can make its service life virtually unlimited.
Remember: following the storage and usage rules helps extend the life of the product.
For Sixinch Adria furniture, adhering to these rules can make its service life virtually unlimited.
Uporaba in vzdrževanje
Prepričani smo, da ste izbrali pohištvo in prostorske oblike Sixinch Adria, izdelane s tehnologijo FoamCoating, zaradi njihovih edinstvenih in zanesljivih lastnosti. Da bi zagotovili, da lastnosti in funkcije naših izdelkov ostanejo ohranjene čim dlje, smo pripravili te preproste smernice za uporabo
Pohištvo in prostorske oblike Sixinch so primerni za uporabo tako v notranjih kot zunanjih prostorih. Shranjevati in uporabljati jih je mogoče pri temperaturah od –40 °C do +85 °C. Neupoštevanje temperaturnih omejitev lahko povzroči izgubo lastnosti in kakovosti pohištva.
Največja dovoljena obremenitev na eno sedežno mesto je 120 kg.
Pri izdelkih s prevlekami se lahko pojavijo začasne gubice, kadar je izdelek močno obremenjen v javnih prostorih ali pod pritiskom. Te gubice s časom izginejo zaradi stalne kroženja zraka v izdelku.
Največja dovoljena obremenitev na eno sedežno mesto je 120 kg.
Pri izdelkih s prevlekami se lahko pojavijo začasne gubice, kadar je izdelek močno obremenjen v javnih prostorih ali pod pritiskom. Te gubice s časom izginejo zaradi stalne kroženja zraka v izdelku.
Montažo in demontažo morajo opraviti usposobljeni strokovnjaki, v skladu z navodili in priporočili proizvajalca.
Pohištvo je treba postaviti na ravne površine. Sedežno in ležeče pohištvo mora stati na vseh nogah ter počivati na ravnih, trdnih in enotnih površinah, da je zagotovljeno pravilno kroženje zraka¹. Izdelkov ne postavljajte v vodo, zemljo, pesek ali podobne površine.
Pri premikanju pohištva ga držite le za spodnji del in se izogibajte vlečenju po tleh.
Če pohištvo vsebuje vgrajene električne elemente, pred premikanjem odklopite vse kable. Izogibajte se neposrednemu stiku z vodo na površinah pohištva, zlasti na mestih z vgrajeno opremo.
Pri uporabi izdelkov kot talnih oblog si slecite čevlje ali uporabljajte obutev s ploskim in mehkim podplatom.
Med gradbenimi deli pohištvo odstranite iz prostora ali zagotovite njegovo zaščito.
Izogibajte se stiku ostrih, koničastih ali rezalnih predmetov s površinami s prevleko FlexPlus.
Ne prekoračite dovoljenih obremenitev in izdelkov ne uporabljajte izven njihovega namena.
¹ Tehnično dno
Vsak FlexPlus izdelek ima ventil za kroženje zraka. Ta ventil omogoča, da izdelek ohrani svojo obliko in prvotni videz dlje časa. Ventil mora ostati odprt in neoviran, da zrak lahko nemoteno kroži v izdelku. Takih izdelkov ne smete postavljati v zemljo, vodo, pesek ali podobne površine.
Za zunanjo uporabo in za prostore z visoko vlažnostjo (zlasti ob bazenih v fitnes klubih, v savnah itd.) je potrebno ojačano dno z nogami. Ojačano dno je obvezno tudi pri vseh izdelkih z vgrajenimi vtičnicami ali drugimi elektronskimi napravami.
Pohištvo je treba postaviti na ravne površine. Sedežno in ležeče pohištvo mora stati na vseh nogah ter počivati na ravnih, trdnih in enotnih površinah, da je zagotovljeno pravilno kroženje zraka¹. Izdelkov ne postavljajte v vodo, zemljo, pesek ali podobne površine.
Pri premikanju pohištva ga držite le za spodnji del in se izogibajte vlečenju po tleh.
Če pohištvo vsebuje vgrajene električne elemente, pred premikanjem odklopite vse kable. Izogibajte se neposrednemu stiku z vodo na površinah pohištva, zlasti na mestih z vgrajeno opremo.
Pri uporabi izdelkov kot talnih oblog si slecite čevlje ali uporabljajte obutev s ploskim in mehkim podplatom.
Med gradbenimi deli pohištvo odstranite iz prostora ali zagotovite njegovo zaščito.
Izogibajte se stiku ostrih, koničastih ali rezalnih predmetov s površinami s prevleko FlexPlus.
Ne prekoračite dovoljenih obremenitev in izdelkov ne uporabljajte izven njihovega namena.
¹ Tehnično dno
Vsak FlexPlus izdelek ima ventil za kroženje zraka. Ta ventil omogoča, da izdelek ohrani svojo obliko in prvotni videz dlje časa. Ventil mora ostati odprt in neoviran, da zrak lahko nemoteno kroži v izdelku. Takih izdelkov ne smete postavljati v zemljo, vodo, pesek ali podobne površine.
Za zunanjo uporabo in za prostore z visoko vlažnostjo (zlasti ob bazenih v fitnes klubih, v savnah itd.) je potrebno ojačano dno z nogami. Ojačano dno je obvezno tudi pri vseh izdelkih z vgrajenimi vtičnicami ali drugimi elektronskimi napravami.
Pohištvo čistite z mehko krpo, semišem ali gobico, navlaženo z vodo.
Uporabljajte profesionalna čistila, namenjena čiščenju stekla, ogledal, tal in pohištva, ki učinkovito odstranjujejo različne vrste umazanije. Vedno upoštevajte navodila na embalaži.
Osnovno vzdrževanje priporočamo najmanj enkrat na teden.
V primeru močne umazanije očistite površino v prvih 6 urah, da zmanjšate tveganje za madeže, sledi ali poškodbe.
Izogibajte se daljšemu puščanju barvnih tekočin (čaj, kava, energijske pijače, rdeče vino, zdravila, sredstva za nego kože in las, sokovi iz zelenjave in sadja itd.) na površinah.
Pri čiščenju ne uporabljajte trdih orodij (trde ščetke, strgala, gobice s plastičnimi ali kovinskimi prevlekami), abrazivnih praškov ali agresivnih tekočin (kislin, lužin, topil, olj).
Uporabljajte profesionalna čistila, namenjena čiščenju stekla, ogledal, tal in pohištva, ki učinkovito odstranjujejo različne vrste umazanije. Vedno upoštevajte navodila na embalaži.
Osnovno vzdrževanje priporočamo najmanj enkrat na teden.
V primeru močne umazanije očistite površino v prvih 6 urah, da zmanjšate tveganje za madeže, sledi ali poškodbe.
Izogibajte se daljšemu puščanju barvnih tekočin (čaj, kava, energijske pijače, rdeče vino, zdravila, sredstva za nego kože in las, sokovi iz zelenjave in sadja itd.) na površinah.
Pri čiščenju ne uporabljajte trdih orodij (trde ščetke, strgala, gobice s plastičnimi ali kovinskimi prevlekami), abrazivnih praškov ali agresivnih tekočin (kislin, lužin, topil, olj).
Garancija velja 24 mesecev od datuma dostave.
Garancija krije proizvodne napake: poškodbe prevlek, gubanje, luščenje, bledenje in druge deformacije pohištva in objektov, ki so nastale pred predajo izdelkov kupcu ali med uporabo, če je bila uporaba v skladu z navodili.
Prekinitev garancije:
Garancija krije proizvodne napake: poškodbe prevlek, gubanje, luščenje, bledenje in druge deformacije pohištva in objektov, ki so nastale pred predajo izdelkov kupcu ali med uporabo, če je bila uporaba v skladu z navodili.
Prekinitev garancije:
- Potek garancijskega obdobja;
- Neupoštevanje pogojev uporabe;
- Prisotnost mehanskih poškodb in napak, znaki nepooblaščenega poseganja v izdelek, ki izhajajo iz nepravilne uporabe, nekvalificirane montaže, popravila ali transporta;
- Prekoračitev dovoljene obremenitve izdelka;
- Poškodbe, povzročene z namernimi ali nenamernimi dejanji uporabnika;
- Poškodbe, povzročene s strani hišnih ljubljenčkov;
- Poškodbe, ki nastanejo zaradi vstopa tujkov, tekočin, živali, insektov itd. v izdelek;
- Poškodbe, ki nastanejo zaradi sprememb konstrukcije izdelka;
- Nepravilna uporaba ali uporaba izven namena izdelka.
Če se izdelek deformira, ga je v nekaterih primerih mogoče popraviti. Vsak primer se obravnava individualno.
Za zahtevek za popravilo pošljite e-pošto na info@sixinch.si z opisom težave in fotografijami izdelka. Možne vzroke bomo pregledali v 5 delovnih dneh. Če fotografije ne bodo zadostne, bo izdelek potrebno dostaviti k nam za popolno strokovno oceno.
Če bo primer potrjen kot garancijski, bomo izdelek brezplačno popravili ali zamenjali. Če garancijski primer ne bo potrjen, bomo ponudili razpoložljive rešitve, vključno s ponovnim nanosom prevleke.
Za zahtevek za popravilo pošljite e-pošto na info@sixinch.si z opisom težave in fotografijami izdelka. Možne vzroke bomo pregledali v 5 delovnih dneh. Če fotografije ne bodo zadostne, bo izdelek potrebno dostaviti k nam za popolno strokovno oceno.
Če bo primer potrjen kot garancijski, bomo izdelek brezplačno popravili ali zamenjali. Če garancijski primer ne bo potrjen, bomo ponudili razpoložljive rešitve, vključno s ponovnim nanosom prevleke.
Če se upoštevajo ta navodila za uporabo, je pričakovana življenjska doba izdelkov vsaj 10 let. Prekomerne ali nepravilne obremenitve ter pomanjkljivo vzdrževanje lahko skrajšajo njihovo življenjsko dobo.
Zapomnite si: upoštevanje pravil shranjevanja in uporabe podaljšuje življenjsko dobo izdelka.
Za pohištvo Sixinch Adria lahko upoštevanje teh pravil naredi življenjsko dobo izdelka praktično neomejeno.
Zapomnite si: upoštevanje pravil shranjevanja in uporabe podaljšuje življenjsko dobo izdelka.
Za pohištvo Sixinch Adria lahko upoštevanje teh pravil naredi življenjsko dobo izdelka praktično neomejeno.